Simasv T100 DIGIT 1 Axis CNC Hydraulic Horizontal Bending Press
The T100 DIGIT 1 AXIS bending press allows the program and micrometer stroke adjustment through CN electronic positioner model SlMplylogik, even under the highest working pressure, so as to obtain the bending angle desired without practice tests and samples. Thanks to this system, the machine is ideal for either the production of prototypes or for the larger series.
Features
- Solid electro-welded work table, suitably shaped to withstand loads notably superior to all bending stresses
- Cylinder placed under the work table, which is free from annoying frames for better machine and tool use , with frontal position for the operator
- Forged steel carriage with double slides, suitably hardened, grounded and protected by dust scrapers.
- 35 touch screen key keyboard, led 16x2 characters, an "X" axis stroke (punch), an "Y" axis stroke side gauge positioner
- 550 memory programs in "Y" axis and in "X" axis, each of the 2 axis has a program with 15 different lines (repeated 999 times)
- Liquid crystal monitor at high resolution
- Selection of 5 languages to program
- Measurements in "inches" and "millimetres"
- Program selector: manual, semiautomatic, automatic
- Linear line measurement system for "CN" at high resolution and unlimited use
- Precision positioning: ± 0.1 mm
- Approach feed speed adjustment through flow control valve electrically driven and CN automatic control
- Hydraulic single block power unit at servo valve positioning and with the possibility of adjusting the pressure
- Electric layout and electromagnetic conductivity tested to "CE" standards;
- Die holder pins made in alloy steel, hardened and grounded to obtain a strong lock;
- Forced lubrication through automatic electric pump;
- Automatic conventional cooling system of the hydraulic unit (cool);
- Electric pedal control at low voltage (24 V) and push-button safety control timer;
- Roomy side tool holder shelves.
Options
Capacities
Technical Specification
| MODEL | T100 DIGIT 1 | ||
|---|---|---|---|
| Table size mm | 880 x 1900 | ||
| Height of workbench from ground mm | 1010 | ||
| Max operating pressure ton | 98 | ||
| Max stroke of mobile punch mm | 330 | ||
| Mobile punch stroke adjustment | YES | ||
| Mobile punch advance and retrieval speed mm/min | 1780 - 2051 | ||
| Mobile punch operating speed mm/min | 473 | ||
| Min & max axis base between mobile & fixed pins mm | 242 - 572 | ||
| Mobile & fixed pins - height mm | 200 | ||
| Mobile & fixed pins - diameter mm | 100 | ||
| Hydraulic power unit Lt | 160 | ||
| Slide lubrication | Automatic | ||
| 3 Phase electric motor kW | 5.5 | ||
| No of slide tool shelves | 2 | ||
| Auxiliary lateral holes on workbench | YES | ||
| Length mm | 2000 | ||
| Width mm | 1550 | ||
| Height mm | 1050 | ||
| Weight kg | 2500 | ||
Similar Models
| MODEL | T100 DIGIT 2 | ||
|---|---|---|---|
| Table size mm | 880 x 1900 | ||
| Height of workbench from ground mm | 1050 | ||
| Max operating pressure ton | 98 | ||
| Max stroke of mobile punch mm | 330 | ||
| Mobile punch stroke adjustment | YES | ||
| Mobile punch advance and retrieval speed mm/min | 1780 - 2051 | ||
| Mobile punch operating speed mm/min | 473 | ||
| Speed selection device | YES | ||
| Min & max axis base between mobile & fixed pins mm | 242 - 572 | ||
| Mobile & fixed pins - height mm | 200 | ||
| Mobile & fixed pins - diameter mm | 100 | ||
| Hydraulic power unit Lt | 160 | ||
| Slide lubrication | Automatic | ||
| 3 Phase electric motor kW | 5.5 | ||
| No of slide tool shelves | 2 | ||
| Auxiliary lateral holes on workbench | YES | ||
| Length mm | 2000 | ||
| Width mm | 2710 | ||
| Height mm | 1050 | ||
| Weight kg | 2550 | ||