Simasv T100 Hydraulic Horizontal Bending Press
The Simasv hydraulic horizontal bending machines are ideal for precision bending, straightening, punching and shearing. All models are equipped with powerful hydraulic cylinders located below the table providing an unencumbered working area. This is of particular benefit compared with traditional bending machines and pressbrakes as enclosed bends can be completed without colliding with the machine frame.
Available with capacities from 22 tonnes up to 100 tonnes and with a large range of tooling, these machines have proved capable of performing a whole variety of operations. The two hand wheels at the front of the machine provide micro adjustment during the bending stroke without needing to remove the material. This allows the operator to 'tweak' the bend and once the desired angle has been achieved production bending can begin. The adjustable return stroke can be set with minimum travel, sufficient to reload the material, greatly reducing cycle time.
Features
- Very adaptable machine able to render many functions.
- Very quiet operation.
- Rapid change tool pins.
- Stroke regulation by means of extremely sensitive electric limit switches and graduated rule.
- Large range of special tooling.
- Ideal for jobbing or production applications.
Options
Capacities
| MODEL | T100 | ||
|---|---|---|---|
| Rated capacity tonne | 100 | ||
| Max flat bar bending mm | 230 x 35 | ||
| Max flat bar bending on edge mm | 25 x 150 | ||
| Max tube bending mm | 88.9 | ||
| Max height straightening mm | 250 | ||
| Punching mm | 30 x 24 | ||
| Bar shearing mm | 20 x 160 | ||
| Section shearing: | |||
| - Square mm | 120 x 120 x 5 | ||
| - Section mm | 120 x 180 x 5 | ||
| - Angle mm | 120 x 120 x 5 | ||
| - Corner mm | 120 x 60 x 5 | ||
Technical Specification
| MODEL | T100 | ||
|---|---|---|---|
| Table size mm | 880 x 1900 | ||
| Table height mm | 1040 | ||
| Stroke mm | 330 | ||
| Approach speed mm/min | 1780 | ||
| Return speed mm/min | 2051 | ||
| Min distance from ram to post mm | 242 | ||
| Max distance from ram to post mm | 572 | ||
| Motor kW | 5.5 | ||
| Length mm | 2000 | ||
| Width mm | 1440 | ||
| Height mm | 1275 | ||
| Weight kg | 2500 | ||
Similar Models
| MODEL | T100 DIGIT 1 | ||
|---|---|---|---|
| Table size mm | 880 x 1900 | ||
| Height of workbench from ground mm | 1010 | ||
| Max operating pressure ton | 98 | ||
| Max stroke of mobile punch mm | 330 | ||
| Mobile punch stroke adjustment | YES | ||
| Mobile punch advance and retrieval speed mm/min | 1780 - 2051 | ||
| Mobile punch operating speed mm/min | 473 | ||
| Min & max axis base between mobile & fixed pins mm | 242 - 572 | ||
| Mobile & fixed pins - height mm | 200 | ||
| Mobile & fixed pins - diameter mm | 100 | ||
| Hydraulic power unit Lt | 160 | ||
| Slide lubrication | Automatic | ||
| 3 Phase electric motor kW | 5.5 | ||
| No of slide tool shelves | 2 | ||
| Auxiliary lateral holes on workbench | YES | ||
| Length mm | 2000 | ||
| Width mm | 1550 | ||
| Height mm | 1050 | ||
| Weight kg | 2500 | ||
| MODEL | T100 DIGIT 2 | ||
|---|---|---|---|
| Table size mm | 880 x 1900 | ||
| Height of workbench from ground mm | 1050 | ||
| Max operating pressure ton | 98 | ||
| Max stroke of mobile punch mm | 330 | ||
| Mobile punch stroke adjustment | YES | ||
| Mobile punch advance and retrieval speed mm/min | 1780 - 2051 | ||
| Mobile punch operating speed mm/min | 473 | ||
| Speed selection device | YES | ||
| Min & max axis base between mobile & fixed pins mm | 242 - 572 | ||
| Mobile & fixed pins - height mm | 200 | ||
| Mobile & fixed pins - diameter mm | 100 | ||
| Hydraulic power unit Lt | 160 | ||
| Slide lubrication | Automatic | ||
| 3 Phase electric motor kW | 5.5 | ||
| No of slide tool shelves | 2 | ||
| Auxiliary lateral holes on workbench | YES | ||
| Length mm | 2000 | ||
| Width mm | 2710 | ||
| Height mm | 1050 | ||
| Weight kg | 2550 | ||