Ercolina TB050 EDT Top Bender
Ercolina’s 050EDT Top Bender is ideal for producing consistent quality bends in pipe, tube, squares, solids and other profiles.
Features
- Mild steel tube capacity 60 x 3 mm
- 2″ Gas inches (4 mm) capacity
- Square tube capacity 50 x 50 x 3 mm
- Maximum CLR 300 mm
- Bend to CLR as small as 2 x Ø
- Simple control with programmable bend angle
- Material spring back compensation with readout
- Quick-change tooling system
- Single Bending Speed
- Accepts Ercolina’s A40-P two axis positioning table for multiple and sequential bends
- Foot pedal control allows hands-free operation
Options
Capacities
Technical Specification
| MODEL | TB050 EDT | ||
|---|---|---|---|
| Flectioin Modulus | 10 cm3 | ||
| Minimum Outside Diameter | 10mm - 1.8" Gas | ||
| Maximum Shaft Speed | 1.3 rpm | ||
| Maximum Centre Line Radius (CLR) | 300mm | ||
| Minimum Centre Line Radius (CLR) | 10mm | ||
| Motor | 1.5kW | ||
| Voltage Requirement | 220-400V 3PH / 50-60 Hz | ||
| Width | 363mm | ||
| Height | 900mm | ||
| Length | 595mm | ||
| Weight | 130kg | ||