Ercolina NC MG030 Mandrel Bender
Ercolina’s MG030 Mandrel Bender is ideal for bending thin wall mild steel, stainless steel, aluminum and other materials.
.jpg)
Features
- Mild steel tube capacity 64 x 3 mm at 2 x Ø
- 2″ Gas inches Sch. 40 capacity
- 60 x 60 x 2 mm square tube capacity
- Maximum bending radius 200 mm
- Minimum bending radius 1.5 x Ø
- NC programmable C axis with manual X & Y positioning
- Variable bending speed
- Programmable bend sequencing and mandrel retraction
- Independent clamp and pressure die adjustment
- Reinforced tool mounting shaft with heavy duty swing arm for maximum rigidity
- Micrometer wiper die adjustment
- Secondary hydraulic pressure die stabilization system
- Quick change tooling reduces setup time
- Tables available in 5′, 10′ or 20′ lengths; standard with pneumatic material clamping and DRO system for linear and rotational positioning
- Bending software available for easy part layout
- Base machine converts to accept Ercolina non-mandrel tooling
Options
Capacities
Technical Specification
| MODEL | NC MG030 | ||
|---|---|---|---|
| Flectioin Modulus | 9.6 cm3 | ||
| Minimum Outside Diameter | 64mm | ||
| Bend Speed | 2/4 (bend/return) | ||
| Maximum Center Line Radius (CLR) | 200mm | ||
| Minimum Center Line Radius (CLR) | 20mm | ||
| Maximum Bend Angle | 180o | ||
| Number of stored programs | 30 x 9 | ||
| Motor | 4.2kW | ||
| Hydraulic Oil Capcaity | 50L | ||
| Noise Level | 65dB | ||
| Width | 8130mm | ||
| Height | 2100mm | ||
| Length | 1118mm | ||
| Weight | 600kg | ||