Morgan Rushworth HSW 60 Hydraulic Steelworker
The HSW 60 is a compact universal hydraulic steelworker with 5 workstations and has been designed for volume production with maximum efficiency. Punching, shearing, cropping and notching can be carried out instantly by pressing the moveable foot pedal. The low power inch mode on each workstation enables correct workpiece positioning and tool alignment. Limit-switches allow accurate adjustment of the stroke length to minimise operational time depending on material thickness. At the angle cutting station, angle iron can be cut on every angle from 45º up to 90º, both internal and external with standard tooling. The machine is supplied with a centralised lubrication system ensuring a easy, simple maintenance programme. Adjustable hold-downs are situated on all work stations to ensure safe and accurate processing of material. A 1M ruled length stop is supplied as standard equipment.
Features
PUNCH STATION
Easy tool change system and swing away stripper with fast manual adjustment ensure a quick setup.
ANGLE STATION
Angle iron can be cut at any angle between 45º and 90º, with either internal or external mitres.
SECTION CUTTING STATION
Cropping of round and square bar is easily performed with the standard blades. Optional blades and hold downs are available to crop special profiles.
SHEARING STATION
Specially designed blade approach angle cuts thin and thick material with minimum distortion.
NOTCHING STATION
This versatile unit is equipped with a rectangular notch unit as standard.
Options
Capacities
Technical Specification
| MODEL |
HSW 60 |
||
|---|---|---|---|
| Punching | |||
| - Dia x Max Thickness mm | 28 x 15 | ||
| - Max Dia x Thickness mm | 38 x 11 | ||
| - Stroke length mm | 55 | ||
| - Throat depth mm | 220 | ||
| - Largest hole dia - standard mm | 38 | ||
| - Largest hole dia - optional mm | 110 | ||
| Shearing | |||
| - Flat bar - width x max thickness mm | 200 x 20 | ||
| - Flat bar - max width x thickness mm | 300 x 15 | ||
| - Angle flange trim - max 45º mm | 80 x 10 | ||
| Angle cutting | |||
| - 90º cut mm | 127 x 12 | ||
| - 45º mitre mm | 80 x 8 | ||
| Section cutting | |||
| - Round / square mm | 40 / 35 | ||
| - Channel / beam - optional mm | 80 x 45 | ||
| - Tee - optional mm | 40 x 5 | ||
| Notching | |||
| - Material thickness mm | 10 | ||
| - Width - rectangle mm | 42 | ||
| - Depth - rectangle mm | 100 | ||
| - Depth - vee mm | 60 | ||
| Tube Notch (Optional) | |||
| - Max outside diameter mm | 60 | ||
| Bending (Optional) | |||
| - Bar bending - max capacities mm | 150 x 12 | ||
| - Sheet bending - max capacities mm | - | ||
| Punching at Notch Station (Optional) | |||
| - Throat depth mm | 110 | ||
| - Max capacity - dia x thickness mm | 20 x 12 | ||
| Technical Data | |||
| - Motor power kW | 4 | ||
| - Nett weight kg | 1440 | ||
| - Length mm | 1520 | ||
| - Width mm | 590 | ||
| - Height mm | 1700 | ||
Similar Models
| MODEL |
HSW 40 |
||
|---|---|---|---|
| Punching | |||
| - Dia x Max Thickness mm | 20 x 15 | ||
| - Max Dia x Thickness mm | 38 x 8 | ||
| - Stroke length mm | 50 | ||
| - Throat depth mm | 175 | ||
| - Largest hole dia - standard mm | 38 | ||
| - Largest hole dia - optional mm | 57 | ||
| Shearing | |||
| - Flat bar - width x max thickness mm | 200 x 13 | ||
| - Flat bar - max width x thickness mm | 350 x 6 | ||
| - Angle flange trim - max 45º mm | 80 x 10 | ||
| Angle cutting | |||
| - 90º cut mm | 80 x 8 | ||
| - 45º mitre mm | 50 x 6 | ||
| Section cutting | |||
| - Round / square mm | 30 / 25 | ||
| - Channel / beam - optional mm | 76 x 38 | ||
| - Tee - optional mm | 38 x 6 | ||
| Notching | |||
| - Material thickness mm | - | ||
| - Width - rectangle mm | - | ||
| - Depth - rectangle mm | - | ||
| - Depth - vee mm | - | ||
| Tube Notch (Optional) | |||
| - Max outside diameter mm | 40 | ||
| Bending (Optional) | |||
| - Bar bending - max capacities mm | - | ||
| - Sheet bending - max capacities mm | - | ||
| Punching at Notch Station (Optional) | |||
| - Throat depth mm | - | ||
| - Max capacity - dia x thickness mm | - | ||
| Technical Data | |||
| - Motor power kW | 3 | ||
| - Nett weight kg | 580 | ||
| - Length mm | 1100 | ||
| - Width mm | 550 | ||
| - Height mm | 1480 | ||
| MODEL |
HSW 45 |
||
|---|---|---|---|
| Punching | |||
| - Dia x Max Thickness mm | 22 x 15 | ||
| - Max Dia x Thickness mm | 38 x 8 | ||
| - Stroke length mm | 50 | ||
| - Throat depth mm | 175 | ||
| - Largest hole dia - standard mm | 38 | ||
| - Largest hole dia - optional mm | 110 | ||
| Shearing | |||
| - Flat bar - width x max thickness mm | 200 x 15 | ||
| - Flat bar - max width x thickness mm | 300 x 12 | ||
| - Angle flange trim - max 45º mm | 80 x 10 | ||
| Angle cutting | |||
| - 90º cut mm | 100 x 10 | ||
| - 45º mitre mm | 70 x 6 | ||
| Section cutting | |||
| - Round / square mm | 30 / 25 | ||
| - Channel / beam - optional mm | 80 x 45 | ||
| - Tee - optional mm | 40 x 5 | ||
| Notching | |||
| - Material thickness mm | 8 | ||
| - Width - rectangle mm | 35 | ||
| - Depth - rectangle mm | 75 | ||
| - Depth - vee mm | 60 | ||
| Tube Notch (Optional) | |||
| - Max outside diameter mm | 60 | ||
| Bending (Optional) | |||
| - Bar bending - max capacities mm | 100 x 12 | ||
| - Sheet bending - max capacities mm | - | ||
| Punching at Notch Station (Optional) | |||
| - Throat depth mm | 85 | ||
| - Max capacity - dia x thickness mm | 18 x 12 | ||
| Technical Data | |||
| - Motor power kW | 4 | ||
| - Nett weight kg | 1180 | ||
| - Length mm | 1450 | ||
| - Width mm | 590 | ||
| - Height mm | 1620 | ||