Promotech ABM-28 Auto Feed Plate Bevelling Machine
The ABM-28 is a bevelling machine designed to mill edges of plates with the thickness of up to 35 mm. The bevelling angle can be set in the entire range from 60° to –60°, including facing at 0°. The feed is performed automatically after starting the machine. The accessories allow bevelling of 36–70 mm thick plates at the angle set in the entire range from 0° to 60° or from 0° to –60°. It is also possible to establish J-bevels in 20–70 mm thick plates and to remove clad of up to 5 mm depth from plates with a thickness of up to 127 mm.
Features
- Carriage installed on a guide track
- Wooden box
- Additional guide track
- Clamp for 10–35 mm plates
- Track clamp for 10–35 mm plates
- Milling unit support for bevelling 10–35 mm plates at 60° to –60°
- Milling unit (includes milling head with 7 cutting inserts)
- Chip container
- Tool container
- 4 mm hex wrench
- 5 mm hex wrench
- 6 mm hex wrench
- 8 mm hex wrench
- 13/17 mm flat wrench
- T15P torx screwdriver
- Nut, spring washer, and round washer for installing the milling unit support
- Grease for screws
- Operator’s Manual
Options
- Support for bevelling 36–70 mm plates at 0° to 60°
- Support for bevelling 36–70 mm plates at 0° to –60°
- 1.2 m guide track
- Support for J-bevelling 20–70 mm plates
- Clamp for 36–70 mm plates
- Track clamp for 36–70 mm plates
- Clad removal attachment
- Clamp of clad removal attachment for 36–80 mm and 81–127 mm plates
- Track clamp of clad removal attachment for 36–80 mm and 81–127 mm plates
Capacities
Technical Specification
| MODEL | ABM 28 | ||
|---|---|---|---|
| Voltage | 1~220-240V, 50-60 Hz | ||
| Power kW | 16 | ||
| Rotational speed (without load) rpm | 2780 | ||
| Protection level IP | 20 | ||
| Protection class |
1 |
||
| Bevel Angle º | 60 to -60 | ||
| Max bevel width mm | 35 | ||
| Feed speed mm/min | 250 - 500 | ||
| Min plate thickness mm | 10 | ||
| Min plate width mm | 110 | ||
| Weight kg | 78.5 | ||